Focused capture, effortless control
A compact condenser microphone designed to handle loud sources with clarity, precision, and natural balance.
Built for demanding instruments and vocals
Excels on percussion, horns, guitar amplifiers, and vocals, capturing power and nuance without harshness.
Transparent sound with minimal correction
A slightly narrower cardioid pattern reduces side bleed and delivers clean recordings that rarely need EQ.
Ehrlund EHR-E
Extended excellence, focused and free
The EHR-E is a small, lightweight studio condenser microphone designed to work effortlessly with louder sound sources. It is especially well suited for percussion, horns, loud guitar amplifiers, and vocals—capturing power, nuance, and detail with calm precision.
An open, airy mesh minimizes acoustic filtering, allowing sound to reach the capsule naturally and without obstruction. Combined with its robust construction, compact size, and low weight, the EHR-E is easy to place exactly where it’s needed—even in tight or demanding setups.
With a pickup pattern that is slightly narrower than a traditional cardioid, the EHR-E offers excellent focus. This helps capture the intended source clearly, while reducing unwanted sound from the sides. The result is clean, controlled recordings with a natural sense of space.
Designed for engineers and musicians who value simplicity and trust their ears, the EHR-E delivers transparent sound that rarely requires corrective EQ—letting performances speak for themselves.
Characteristics & features
- Large-diaphragm condenser microphone
- Patented triangular membrane design
- Internal amplification and power circuitry
- Optimized for instrument and vocal recording
- Transparent and natural sound
- Excellent low-noise performance
- Phase- and frequency-linear internal amplifiers
- Compact size and lightweight construction
- Slightly narrower cardioid pattern for reduced side bleed
- Accurate bass response, even at moderate distances
- Natural reproduction of fast transients
- Handles sound pressure levels up to 137 dB SPL at <1% THD
- Negligible sound coloration, true to the original source
- Frequency range from infrasonic bass to ultrasonic treble
- Low energy consumption, approx. 2.0 mA
- Designed for flat EQ—no pre-filtering required
- Every Ehrlund microphone is individually stereo-matched within its model
- Unaffected by load impedance
Impedance
The frequency response remains unaffected by variations in load impedance from the mixing console. The response is identical whether connected to an input impedance of 200 Ω or 2000 Ω.
Power supply
48 V / 2.0 mA phantom power via XLR.
Cable
Supplied with a Neutrik nanoCon XLR female to 3-pin XLR microphone cable.
Microphone stand connection
Standard U.S. thread:
5/8″, with included pre-mounted removable adapter for 3/8″.
Technical specifications
Type: Condenser microphone
Membrane type: Triangular membrane combining characteristics of both large and small diaphragms
Pickup pattern: Cardioid
Frequency range: 7 Hz – 87,000 Hz
Sensitivity at 1 kHz: −42 dBV/Pa (8 mV/Pa)
Impedance: Unaffected by load impedance
Equivalent noise level: < 9 dBA
Signal-to-noise ratio: 85 dBA
Dynamic range: 128 dB
Max SPL (peak):
– 132 dB SPL @ 0.5% THD
– 137 dB SPL @ 1% THD
– 155 dB SPL (clip)
Power supply: 48 V phantom power
Current consumption: 2.0 mA
Connection: nanoCon XLR female to 3-pin XLR male
Materials: Aircraft-grade aluminium body, hardened nickel-plated stainless-steel grille
Finish: Glass bead blasted
Dimensions: Ø60 mm × 35 mm × 115 mm
Weight: 174 g
PDF manual
Ehrlund EHR-E
Extended excellence, focused and free
The EHR-E is a small, lightweight studio condenser microphone designed to work effortlessly with louder sound sources. It is especially well suited for percussion, horns, loud guitar amplifiers, and vocals—capturing power, nuance, and detail with calm precision.
An open, airy mesh minimizes acoustic filtering, allowing sound to reach the capsule naturally and without obstruction. Combined with its robust construction, compact size, and low weight, the EHR-E is easy to place exactly where it’s needed—even in tight or demanding setups.
With a pickup pattern that is slightly narrower than a traditional cardioid, the EHR-E offers excellent focus. This helps capture the intended source clearly, while reducing unwanted sound from the sides. The result is clean, controlled recordings with a natural sense of space.
Designed for engineers and musicians who value simplicity and trust their ears, the EHR-E delivers transparent sound that rarely requires corrective EQ—letting performances speak for themselves.
Characteristics & features
- Large-diaphragm condenser microphone
- Patented triangular membrane design
- Internal amplification and power circuitry
- Optimized for instrument and vocal recording
- Transparent and natural sound
- Excellent low-noise performance
- Phase- and frequency-linear internal amplifiers
- Compact size and lightweight construction
- Slightly narrower cardioid pattern for reduced side bleed
- Accurate bass response, even at moderate distances
- Natural reproduction of fast transients
- Handles sound pressure levels up to 137 dB SPL at <1% THD
- Negligible sound coloration, true to the original source
- Frequency range from infrasonic bass to ultrasonic treble
- Low energy consumption, approx. 2.0 mA
- Designed for flat EQ—no pre-filtering required
- Every Ehrlund microphone is individually stereo-matched within its model
- Unaffected by load impedance
Impedance
The frequency response remains unaffected by variations in load impedance from the mixing console. The response is identical whether connected to an input impedance of 200 Ω or 2000 Ω.
Power supply
48 V / 2.0 mA phantom power via XLR.
Cable
Supplied with a Neutrik nanoCon XLR female to 3-pin XLR microphone cable.
Microphone stand connection
Standard U.S. thread:
5/8″, with included pre-mounted removable adapter for 3/8″.
Technical specifications
Type: Condenser microphone
Membrane type: Triangular membrane combining characteristics of both large and small diaphragms
Pickup pattern: Cardioid
Frequency range: 7 Hz – 87,000 Hz
Sensitivity at 1 kHz: −42 dBV/Pa (8 mV/Pa)
Impedance: Unaffected by load impedance
Equivalent noise level: < 9 dBA
Signal-to-noise ratio: 85 dBA
Dynamic range: 128 dB
Max SPL (peak):
– 132 dB SPL @ 0.5% THD
– 137 dB SPL @ 1% THD
– 155 dB SPL (clip)
Power supply: 48 V phantom power
Current consumption: 2.0 mA
Connection: nanoCon XLR female to 3-pin XLR male
Materials: Aircraft-grade aluminium body, hardened nickel-plated stainless-steel grille
Finish: Glass bead blasted
Dimensions: Ø60 mm × 35 mm × 115 mm
Weight: 174 g
PDF manual
Focused capture, effortless control
A compact condenser microphone designed to handle loud sources with clarity, precision, and natural balance.
Built for demanding instruments and vocals
Excels on percussion, horns, guitar amplifiers, and vocals, capturing power and nuance without harshness.
Transparent sound with minimal correction
A slightly narrower cardioid pattern reduces side bleed and delivers clean recordings that rarely need EQ.
Ehrlund EHR-E
Extended excellence, focused and free
The EHR-E is a small, lightweight studio condenser microphone designed to work effortlessly with louder sound sources. It is especially well suited for percussion, horns, loud guitar amplifiers, and vocals—capturing power, nuance, and detail with calm precision.
An open, airy mesh minimizes acoustic filtering, allowing sound to reach the capsule naturally and without obstruction. Combined with its robust construction, compact size, and low weight, the EHR-E is easy to place exactly where it’s needed—even in tight or demanding setups.
With a pickup pattern that is slightly narrower than a traditional cardioid, the EHR-E offers excellent focus. This helps capture the intended source clearly, while reducing unwanted sound from the sides. The result is clean, controlled recordings with a natural sense of space.
Designed for engineers and musicians who value simplicity and trust their ears, the EHR-E delivers transparent sound that rarely requires corrective EQ—letting performances speak for themselves.
Characteristics & features
- Large-diaphragm condenser microphone
- Patented triangular membrane design
- Internal amplification and power circuitry
- Optimized for instrument and vocal recording
- Transparent and natural sound
- Excellent low-noise performance
- Phase- and frequency-linear internal amplifiers
- Compact size and lightweight construction
- Slightly narrower cardioid pattern for reduced side bleed
- Accurate bass response, even at moderate distances
- Natural reproduction of fast transients
- Handles sound pressure levels up to 137 dB SPL at <1% THD
- Negligible sound coloration, true to the original source
- Frequency range from infrasonic bass to ultrasonic treble
- Low energy consumption, approx. 2.0 mA
- Designed for flat EQ—no pre-filtering required
- Every Ehrlund microphone is individually stereo-matched within its model
- Unaffected by load impedance
Impedance
The frequency response remains unaffected by variations in load impedance from the mixing console. The response is identical whether connected to an input impedance of 200 Ω or 2000 Ω.
Power supply
48 V / 2.0 mA phantom power via XLR.
Cable
Supplied with a Neutrik nanoCon XLR female to 3-pin XLR microphone cable.
Microphone stand connection
Standard U.S. thread:
5/8″, with included pre-mounted removable adapter for 3/8″.
Technical specifications
Type: Condenser microphone
Membrane type: Triangular membrane combining characteristics of both large and small diaphragms
Pickup pattern: Cardioid
Frequency range: 7 Hz – 87,000 Hz
Sensitivity at 1 kHz: −42 dBV/Pa (8 mV/Pa)
Impedance: Unaffected by load impedance
Equivalent noise level: < 9 dBA
Signal-to-noise ratio: 85 dBA
Dynamic range: 128 dB
Max SPL (peak):
– 132 dB SPL @ 0.5% THD
– 137 dB SPL @ 1% THD
– 155 dB SPL (clip)
Power supply: 48 V phantom power
Current consumption: 2.0 mA
Connection: nanoCon XLR female to 3-pin XLR male
Materials: Aircraft-grade aluminium body, hardened nickel-plated stainless-steel grille
Finish: Glass bead blasted
Dimensions: Ø60 mm × 35 mm × 115 mm
Weight: 174 g
PDF manual
Focused capture, effortless control
A compact condenser microphone designed to handle loud sources with clarity, precision, and natural balance.
Built for demanding instruments and vocals
Excels on percussion, horns, guitar amplifiers, and vocals, capturing power and nuance without harshness.
Transparent sound with minimal correction
A slightly narrower cardioid pattern reduces side bleed and delivers clean recordings that rarely need EQ.